Samsung Dryer Not Drying Clothes [FIXED]

By |

Is your Samsung Dryer Not Drying Clothes? Then follow these resolution steps and find the problem and fix it easily. Normally this issue happens mainly due to the bad elements or parts in the Samsung dryer and if its new dryer then this can be the possible cause. But before going to conclusion, you have to some further testing to confirm that the element is the main issue which is causing the problem of Samsung Dryer Not Drying Clothes. Your dryer may have false voltage, bad heating elements or air vent is clogged or some loose connection issues. You can also check the Samsung Dryer error code reference if you see any error code in your Dryer.

Samsung Dryer Not Drying Clothes Solution

When you see the issue for the first time, then please check that vent lines and filter are not clogged. Make sure that they are clean because any clogged dryer vent line will make the dryer to not properly heat and so it will cause the Samsung dryer not drying clothes issue. Also check each part of the dryer to confirm which part is causing the issue. Once you have identified the faulty heating part, please repair it or replace it. In next section we will show you how to remove and replace Samsung dryer parts.

Steps for Replacing Faulty part of Samsung Dryer

  1. Switch off the Dryer and make sure that power cord is disconnected.
  2. Remove the screws which will in the back side of a dryer.
  3. Now you will be able to remove the lid.
  4. Now lift the control panel up and remove it.
  5. Please remove the wire harshness and then remove the 4 screws from front panel.
  6. Now disconnect the door switch wire and lift the panel off.
  7. remove the heating element housing by removing screws.
  8. Now remove the mounting blanket.
  9. Similarly remove other parts.
READ  How To Fix Samsung Dryer TE Error Code

Please check the below video for detailed instructions.

You can use the Samsung heating element DC47-00019A for replacing. This heating element works with most of the Samsung Dryers. By replacing the heating element, you will be able to solve Samsung Dryer Not Drying Clothes issue.

How Samsung Dryer’s Heating Element Works?

Heating element starts working as soon as you switch the dryer on. It will heat up and become re and hence will heat up the dryer. If the dryer temperature go down below the correct heating temperature, then it will automatically again become ON and starts heating the dryer again. This process will continue till your clothe is completely dry.

Due to continuous heating and cooling , the heating element may become faulty or get damaged. Sometimes the vent exhaust may be clogged which makes the element to heat up and get burned and damaged. So check f there are any blockage.

Other issue that may cause the Samsung dryer not drying clothes is due to faulty thermostat an high limit cut off fuse. Please check them to be sure that it is in proper condition.

The heating element DC47-00019A ill work with following models.


We hope that this article helped you. Please do comment for any issues.

Leave a Reply

Your email address will not be published. Required fields are marked *