[FIXED] KitchenAid Refrigerator won’t stop beeping with Error Code PO

By |
1 Comment

Are you facing the issue of KitchenAid Refrigerator won’t stop beeping with Error Code PO, then you are at right place. You see that it display Error Code PO. So you press the CONFIRM button which is on the display screen and the continuous beeping stops. But after few minutes it again displays the Error Code PO and KitchenAid Refrigerator won’t stop beeping. It occurs with most of the Kitchen Aid French door Refrigerator models such as KRMF706EBS or KFIV29PCMS. We have given the cause and solution to fix this beeping issue below.

Please make sure that before you decide to replace the part of KitchenAid Refigerator, cut off the power supply to refrigerator for few minutes. Sometimes it will reset the control board the may fix the KitchenAid Refrigerator won’t stop beeping with Error Code PO issue. If it still doesn’t work then please check below for other solution.

This is what you need to do to stop the continuous beeping of KitchenAid French Refrigerator.

  1. Replace the Control Board when you see PO Error code.
  2. Or Replace the Power Supply Board.

So Control Board and Power Supply Board can cause the PO Error code. We suggest you to search them on Amazon or at your local improvement shop and replace them.

itchenAid Refrigerator won’t stop beeping with Error Code PO can also be caused due to the open Pantry Drawer. Please try to close the Pantry Drawer. If it is closed and yet still no LED lights are illuminating then it might be because UI is damaged. SO you need to replace the Control board by checking its model number.
If This Does not solve problem then please replace the Power Supply board and it may fix the issue of Continuous beeping in KitchenAid Refrigerator Error Code PO due to Power Supply Board.
When you press the CONFIRM button then it will work for few minutes and you will hear a clicking sound because the refrigerator will restart and then again after few minutes it will be back to same condition and it will again start beeping. The relay cause the clicking sound and refrigerator restarts. SO You need to replace the Power supply board and it will fix the issue caused by Error Code PO.
READ  [SOLVED] How to Fix Water Is Leaking Behind Refrigerator
We Hope that now you are able to fix KitchenAid Refrigerator won’t stop beeping with Error Code PO issue. Please check our website for more Refrigerator related issue.

One thought on “[FIXED] KitchenAid Refrigerator won’t stop beeping with Error Code PO”

  1. James

    This advice may not be accurate. The PO code shows repeatedly because the control board itself is restarting itself continuously. Something is causing the board to reboot, which could be the board itself or something connected to the board. In my case, it was the freezer evaporator fan. You can test a LOT of things with NO disassembly and NO tools by getting the tech sheet for your model and putting your refrigerator in diagnostic mode.

    When I used diagnostic mode to run the freezer evap fan, the whole system restarted itself again, so I knew to change the fan out.

    I posted this information on Appliance Blog forum, which is the first Google hit that recommends unconditionally to buy a new control board to resolve the PO code, and Jake the shady admin on that site DELETED my comment and my account and then LOCKED the thread so people will continue to be misled. Complete scumbag.

    Hopefully people dig a little further and find this comment before getting ripped off on an expensive, non-refundable part.

    Reply ↓

Leave a Reply

Your email address will not be published. Required fields are marked *